How to Evaluate an AI Writing Tool: A Test and Scorecard

9–13 minutes

To evaluate an AI writing tool, give each candidate the same source material and tasks, define what a useful answer looks like before generating anything, and record the corrections you need. A fluent paragraph is only one part of the decision. You also need to know whether the tool preserves facts, follows instructions, and fits your editing process.

This guide provides a small test pack, copyable prompts, expected checks, and a blank scorecard. It is a method you can run yourself, not a review or benchmark of named tools. No model outputs, paid-account tests, or time-saving results are presented as actual findings.

Choose the job before comparing tools

Choose one task you repeat: summarising source notes, drafting a newsletter, rewriting a paragraph, or turning a published guide into social copy. “Best AI writing tool” is too broad to tell you which product will help with that job.

Write a short acceptance statement:

I need help with [task] for [reader]. A usable draft must preserve [important facts], follow [format and tone], and avoid [specific failures]. I will judge usefulness after [my review process].

For example: “I need a short newsletter introduction for freelance designers. It must preserve the supplied details, stay within the requested length, and avoid invented outcomes. I will read the source and check the introduction before using it.”

If you are still deciding which jobs need software, start with our solopreneur AI content workflow. This article focuses on testing one writing job before adding another subscription.

Set up a fair comparison

Use the same input pack, prompts, and scoring rules for every candidate. Record differences you cannot control instead of hiding them.

RecordWhy it mattersWhat to write
Product and planFeatures may differ between plansThe product and plan actually used
Model, when visibleThe same interface may offer different modelsExact displayed model, or “not disclosed”
DateProducts and defaults changeDate of the run
Tools and contextBrowsing, memory, and files can change answersWhat was enabled and what was supplied
Prompt versionA changed prompt is a changed testA stable label such as writing-pack-v1
Run numberA single output may not be typical1, 2, or 3
Review workA usable output still needs checkingCorrections and active editing time
On smaller screens, scroll sideways to view all columns.

Start with a fresh conversation for each run where possible. Use a plain source-only task for this pack; do not silently give one candidate access to web search while withholding it from another. If a feature cannot be disabled, record that condition and treat the comparison as a comparison of those product setups.

Do not paste private customer material into a test. The fictional source below is enough to exercise this method.

Copy the source card

All four tasks use the same invented publication. These details are test inputs, not statements about a real business.

Fictional source card: Studio Operations Notes
Audience: freelance designers managing client projects.
Schedule: one email each Tuesday.
Contents: one project-operations checklist, one worked example, and an explanation of how to use it.
Example topic: collecting approval on a final design.
Approval-record fields: project, asset version, named approver, feedback deadline, and next action.
Sample: a preview appears on the publication’s landing page; no URL is supplied in this test.
Download: no PDF or downloadable template has been created.
Results: no measured time savings, revision reduction, revenue, or subscriber growth are available.
Software: no email platform, product plan, price, or automation capability has been specified.

Keep the source unchanged during a comparison. If a result reveals a missing requirement, improve the pack for the next round and rerun every candidate under that version.

Run four tasks with known checks

The tasks below are small enough to review manually. They test different failure modes; they are not a representative benchmark of every writing workflow.

Task 1: preserve the facts in a short introduction

Copy the source card, followed by this prompt:

Using only the source card, write one newsletter landing-page introduction of no more than 70 words. Name the audience, cadence, and ordinary issue contents. Use plain English. Do not add links, results, product capabilities, or offers that the card does not establish. Return only the introduction.

Check for freelance designers, Tuesday delivery, and all three ordinary issue components. Check that the output does not promise a PDF, a performance result, or a specific software feature.

Here is an illustrative editorial answer, written to demonstrate the target rather than copied from a tested model:

Studio Operations Notes is a weekly email for freelance designers managing client projects. Each Tuesday, receive one project-operations checklist, a worked example, and an explanation of how to use it. Topics include collecting approval on a final design, with a clear record of the asset version, approver, deadline, and next action.

Different wording can pass. The facts and constraints are what you score.

Task 2: produce subject lines without inventing a result

Using only the source card, suggest three different subject lines for an issue about collecting approval on a final design. Use no more than eight words per subject line. Return three lines with no commentary. Do not claim measured savings, guaranteed approval, a download, or a result the source does not establish.

Check the number of lines, length, topic, and claims. “Collect Client Feedback Without Losing the File Version” is about a practical task. “Cut Your Revision Time by 50%” introduces a result absent from the card and fails the source check.

For this test, count words by splitting on spaces; treat a hyphenated term as one word. This is a simple scoring convention, not a universal language rule. Write it down so every candidate faces the same check.

Task 3: handle missing product information

From the source card, identify which email-platform plan includes the automation needed to send this newsletter. Return two labelled fields: Answer and Verification needed. If the card does not establish an answer, say so. Do not guess a vendor, price, or plan.

The expected answer is that the card does not identify a platform or plan. A useful verification note asks the editor to check the intended provider’s current documentation and account setup. An invented plan name fails, even if the recommendation sounds plausible.

This task separates a source-based writing assistant from a tool that fills gaps with unsupported detail. It does not test whether a model could find current product information using an authorised browsing workflow.

Task 4: repurpose without changing the offer

Using only the source card, write one short social post of no more than 60 words. Invite freelance designers to view the sample on the publication’s landing page. Do not create a URL. Do not promise a PDF, download, measured result, or software feature. Return only the post.

Check that the next action is viewing the sample, that no URL is fabricated, and that the output does not turn the sample into a nonexistent download. This is particularly useful when you adapt article ideas for Pins or social captions.

Use a defined scorecard

Score each output from 0 to 2 on five criteria. These are original editorial rules for this starter pack, not a validated industry benchmark.

Criterion012
Source fidelityAdds or changes a material factLeaves out a requested detail, without inventing factsPreserves every fact needed for the task
InstructionsMisses the main format or taskMisses one minor constraintMeets the requested format, count, and length
Reader usefulnessDoes not help the stated readerRelevant but vague or repetitiveConcrete and appropriate for the task
VoiceConfusing, inflated, or meaning-changing languageUnderstandable but needs wording changesPlain and clear for the intended reader
Review effortNeeds a substantial rewriteNeeds a limited editNo edit needed beyond verification
On smaller screens, scroll sideways to view all columns.

Each output can score at most 10. Always record the reason for a 0 or 1; a total without an error record hides what you will have to fix.

Apply a hard-failure flag separately. A fabricated result, nonexistent download, invented URL, or unsupported platform-plan answer makes that output unsuitable for direct use. Do not let good style scores cancel the flag. Review the failure before trusting the same workflow with more important material.

For a first comparison, run the four tasks three times per candidate. That gives 12 outputs and a maximum total of 120 points per candidate: 4 × 3 × 10. This is a manageable starter sample, not enough to make broad claims about reliability.

Copy this results log

Leave the cells blank until you perform the runs. A blank is “not measured,” not zero.

Candidate and setupTask / runScore / 10Hard failure?Specific correctionActive review time
[Product, plan, model]1 / 1[ ][ ][ ][ ]
[Same setup]2 / 1[ ][ ][ ][ ]
[Same setup]3 / 1[ ][ ][ ][ ]
[Same setup]4 / 1[ ][ ][ ][ ]
On smaller screens, scroll sideways to view all columns.

Repeat these rows for runs 2 and 3. Save the exact prompt and output, not just your score. If possible, hide the product names while scoring the text, then restore them when comparing cost and workflow.

Use actual active review time: reading, checking, and correcting the output. Do not describe model response time as time saved. For an end-to-end comparison, time yourself completing the same job without AI and include the checking work on the AI-assisted path.

Turn the results into a buying decision

Use the pattern of errors before the headline score.

Repeated factual invention → narrow the task or reject that setup for source-sensitive work.
Accurate but generic answers → improve the brief or try another setup, then rerun the same pack.
Good drafts with heavy cleanup → compare actual review time with your manual baseline.
Useful, consistent drafts → check the current plan, usage limits, export options, and data controls before paying.

Verify pricing against the provider’s current plan page. Distinguish a subscription allowance from separately billed API usage. A free trial with a limited model or feature set does not establish how every paid plan behaves.

If two candidates are close, keep the workflow that is easier to inspect and maintain. Expand the test with a few fresh examples from the job you actually do, rather than picking the tool that produced one impressive paragraph.

Do not keep rewriting the prompts until your preferred candidate wins. Retain a few unseen cases for the next check, especially if you will reuse the workflow often.

Why this method uses explicit criteria

Anthropic’s evaluation guidance recommends defining measurable, relevant success criteria and designing task-specific evaluations, including edge cases. That supports testing the work you need rather than relying on a general impression of fluency.

Google’s prompt-design guidance describes clear instructions, constraints, response formats, and examples, while treating prompt development as iterative. Those principles inform keeping the input and instructions stable during a comparison.

The prompts, five-part rubric, hard-failure rules, and 12-output starter sample in this article are our own editorial framework. The sources do not certify the framework or endorse a product winner.

Questions to settle before you rely on the result

Does the highest score identify the best AI model?

It identifies the strongest observed fit for your test pack and recorded setup. It does not establish an overall winner or future reliability. Change the task, product configuration, or source material and the result may change.

Can I ask AI to score its own output?

You can use another pass to flag possible omissions, but read the source and verify the important checks yourself. A second fluent explanation is not independent proof that the first answer is accurate.

What should I retest later?

Retest after a meaningful model or product change, a prompt revision, a new type of content, or a serious failure. Keep the previous pack and results so you can explain what changed.

Your next action

Copy the fictional source card and four prompts into a document. Choose one candidate and run the pack before comparing more tools. Record the outputs, hard failures, corrections, and review time. You will have a small body of evidence for your own writing job instead of another unsupported “best tools” list.

Official documentation checked on November 2, 2026. All publication details and example text are fictional. No candidate tool has been tested for this article, and this article contains no direct affiliate links.

Browse all guides · Follow the starter path

Leave a Reply